Americutter Brick and Block Saws with Honda
Gasoline Motors
The Americutter-14 brick saw and the Americutter-20 block saw product line combines improved performance, enhanced reliability, and unmatched flexibility to provide the the most efficient and durable masonry saw available in the industry.
The Americutter brick and block saws utilize direct drive design to provide increased horsepower to the blade, providing faster cutting cycles. Sealed arbor shaft eliminates grease maintenance. Belt replacement and adjustment is simple. Blade to saw table alignment is set at the factory and and never needs further adjustment. All chassis are fully welded 7 gauge steel and finished with durable powder coated paint. A summary of the specifications is listed below:
Americutter-14 Brick Saw
| 5.5hp Honda motor
|
170 lbs, pull start, Cyclone air filter system, and oil alert
3500 RPM. Water kit, 5" cut depth, 18" length of cut.
18"x12" conveyor table, 1" blade arbor. 14" blade.
|
| 6.5hp Honda motor
|
175 lbs, pull start, Cyclone air filter system, and oil alert.
3500 RPM. Water kit, 5" cut depth, 18" length of cut.
18"x12" conveyor table, 1" blade arbor. 14" blade.
|
| 9.0hp Honda motor
|
215 lbs, pull start, Cyclone air filter system, and oil alert.
3500 RPM. Water kit, 5" cut depth, 18" length of cut.
18"x12" conveyor table, 1" blade arbor. 14" blade.
|
| 9.0hpE Honda motor
|
220 lbs, electric start, Cyclone air filter system, & oil alert.
3500 RPM. Water kit, 5" cut depth, 18" length of cut.
18"x12" conveyor table, 1" blade arbor. 14" blade.
|
Americutter-20 Block Saw
| 13.0hpE Honda motor
|
305 lbs, electric start, Cyclone air filter system, & oil alert.
3900 RPM. Water kit, 8" cut depth, 24" length of cut.
21"x16" conveyor table, 1" blade arbor. 20" blade.
|
Americutter Components
| Saw Cart
|
51"L x 27"W, welded angle iron frame, wire mesh decking.
12" pneumatic casters, 38"L handle. Powder coated finish.
Weight capacity 1600 lbs. Supports all saw frames.
|
| Saw Stand
|
51"L x 27"W, welded angle iron frame. 32"H, supports all
frames. Black powder coated finish. 750 lbs. capacity.
|
Americutter Saws with
electric motors
Americutter Diamond
Blades
|
|
|
